Easy Way To Fix Ip Configuration Failure

Despite how far technology has come, it’s definitely not perfect. This is especially true when you really need Wi-Fi but get error messages instead. The obtaining IP address error means you’re stuck without Wi-Fi, which is incredibly frustrating if you have a limited mobile data plan.

If you are using the Windows 10 operating system and receiving a “WiFi doesn’t have a valid IP configuration” error, then you know how it feels. This prevents the use of WiFi and is a common problem experienced by Windows users.

The problem concerning not having a valid IP configuration can occur even if you are using an Ethernet connection on your computer. The good news is that you can easily fix this problem. Here are some ways to fix this problem easily.

Release And Renew Your IP Address

Release And Renew Your IP Address

This might be the easiest way to fix the “WiFi doesn’t have a valid IP configuration” problem by executing commands in Command Prompt. First, open Command Prompt by typing “command prompt” in Search and right-clicking on the “Command Prompt”. Then, select “Run as administrator” to run it with administrator privileges.

In the Command Prompt window, type “ipconfig /release” and press Enter on your keyboard. Make sure that you put a space between “ipconfig” and “and release” in the command.

Now, do the same with the “config /renew” command. You must put a space after “ipcongif” in this command as well. Press Enter.

When you have finished entering the commands, type “exit”, and press Enter to exit Command Prompt. Try restarting your computer to see if this helped to solve your problem.

Reset TCP/IP

Reset TCPIP

This one is also simple: execute commands in Command Prompt. Open Command Prompt from Search again by right-clicking on it and run as administrator. In the Command Prompt window, type the “netsh Winsock reset” command and press Enter on your keyboard.

Then, type the “netsh int IP reset” command and press Enter on your keyboard. Exit Command Prompt and restart your computer to see if it helped to solve the problem.

Uninstall Wireless Adapter Driver

You may receive the “WiFi doesn’t have a valid IP configuration” error due to a faulty network driver. You can try to uninstall the wireless adapter driver and then let the Windows 10 operating system reinstall it automatically the next time you start Windows. To uninstall your network adapter driver, go to Device Manager. Type “device manager” in Search and click the “Device Manager” result.

In the Device Manager window, find “Network adapters”, expand it, and right-click on your wireless device, then choose “Uninstall” from the drop-down menu.

You will be asked to confirm the uninstallation. Click “OK”. Mark the “Delete the driver software for this device” checkbox if you see this option.

You will need to restart your PC for the changes to take effect. Restart your computer and see if it helped to solve this problem.

Removing And Then Adding The Network

Removing And Then Adding The Network

This method requires first removing the network by clicking on Forget now and again connecting it. Below are the steps that are employed in this method-

  • Click on Settings
  • Select the option of “Wifi”
  • Press over the network that refuses to connect and click on Wifi Settings
  • After click on the Forget network.
  • Scan for available networks (if networks are not available).
  • Select the network once more and ensure the connection with it by entering the relevant password.

Restart The Router

If you try all previous methods then you are getting the same error, so this is the time to reset your Wifi Router. Because in most cases router default configuration has been changed by mistake. This process will be done by Hardware and Software both methods.

Get Closer

Interference could be the cause of the error. As incredibly simple as it sounds, getting closer to your router could be the solution. The closer you are, the stronger the Wi-Fi signals. A poor signal not only leads to slow Internet but may not allow you to connect at all.

Usually, you receive an error saying you can’t connect, but you may also see the obtaining IP address error.

Conclusion

Any of the above methods can solve your obtaining IP address error issue on Android. Start from the easiest method and work your way through until you find the one that works best for you.

FAQ’s

Why do I get failed to obtain an IP address?
The “failed to obtain IP address” error appears when a user tries to connect to a Wi-Fi network. A router assigns an IP address for any connecting device. Your device must obtain this address to be able to connect to a router. This message means that it cannot do that, and the user is unable to join a Wi-Fi network.
How do I fix my IP address?
5 ways to change your IP address: • Switch networks. The simplest way to change the IP address of your device is to switch to a different network. • Reset your modem. When you reset your modem, this will also reset the IP address. … • Connect via Virtual Private Network (VPN). • Use a proxy server. • Contact your ISP.
What is IP configuration?
The IP Configuration window configures the Internet Protocol parameters, allowing the device to receive and send IP packets. You can use the web browser interface to access IP addressing only if the switch already has an IP address that is reachable through your network.
What is IP address for WiFi?
An IP address is a unique address that identifies a device on the internet or a local network. IP stands for “Internet Protocol,” which is the set of rules governing the format of data sent via the internet or local network.
How do I check my IP configuration?
Open the Windows Start menu and right-click “Network.” Click “Properties.” Click “View Status” to the right of “Wireless Network Connection,” or” Local Area Connection” for wired connections. Click “Details” and look for the IP address in the new window.
Is IP address valid?
A valid IP address must be in the form of A.B.C.D, where A, B,C, and D are numbers from 0-255. The numbers cannot be 0 prefixed unless they are 0. Note: You only need to implement the given function.

 

Leave a Comment